TechnoFlex
Adhesive mortar

Product Definition
> High performance single component cement based flex adhesive mortar.

Application Areas
Application Area:
> in places subject to excessive sudden temperature changes (frosting-defrosting) like cold storage warehouses and shocking facilities,
> in external facades of bakeries, floor heating systems,
> In patios and garden arrangements,
> In wet areas (pools, water storage tanks, etc.).
> In places with intensive pedestrian and cargo traffic like shopping business centers, hospitals and schools,
Coating Material:
> Used for bonding coating Materials(Stone Product) like floor and wall ceramic Tiles(G683), Granite(Paradiso), porcelain ceramic Tiles(G683), clinkers, decorative bricks and Marble(Shanxi Black),
Application Surface
> For ceramic re-coating on old ceramics and Granite(Paradiso),
> For ceramic tile applications on complicated surfaces like gypsum and paint,
> On surfaces like concrete, plaster and screed.

Features
> High bonding strength,
> High elasticity,
> High cold-heat resistance,
> Non-slipping during vertical surface applications,
> Long workability time,
> Allows easy combing.

Technical Features
> Appearance: Gray and White colored powder
> Application Temperature : +5°C / +35°C
> Mixture Rate: 5,5 - 6 lt. water / 25 kg. powder
> Pot Life: 6 hours
> Grouting Time: After 8 hours for wall Tiles(G683) - After 1 day for floor Tiles(G683)
> Consumption: Average 3 - 5 kg./m²
> Shelf Life: 12 months in unopened package stored in dry medium
> Flexibility: Good
> Open Time Tensile bonding Strength : After minimum 30 minutes > 0.5 N/mm² (EN 1346)
> Slipping: < 0.5 mm. (EN 1308)
> Bonding Strength: > 1 N/mm² (EN 1348)
> Thermal Resistance: -40°C / +80°C

Application Instructions
Surface Preparation
> Ensure that the surface is cured and strong.
> Clean the surface by removing the residues that may prevent adhesion.
> Correct the defects on the application surface with TamirArt or Mastar 10.
Application
> Pour down 25 kg. of powder mortar into 5,5-6 lt. of water slowly and mix until you have a lump free mortar. (A low speed mixer is recommended for the mixture.)
> Let the mortar settle for 5-10 minutes for maturation, mix again before starting the application.
> Spread the mortar onto the surface and comb with a notched trowel (See: Trowel Notch Size Table) suitable for the size of the tile.
> It is recommended to use combined adhesion method during application of 40 x 40 cm. and bigger size coating Materials(Stone Product) and during applications in places with intensive pedestrian-cargo traffic and excessive temperature changes.
> Fix the Tiles(G683) within 30 minutes onto the combed mortar.
>Consume the prepared mortar within 6 hours.
> Dispose off the expired or scabbed mortar.
> Apply grouting after 8 hours on walls and 1 day on floors.

Warnings
Warnings
> Due to its cement based content, avoid breathing its powder, avoid skin and eye contact..
> Do not add any additives other than those stated in the Application Instructions.

Storage
> Store in dry medium in maximum 10 layer stacks.
> Shelf Life, 12 months in unopened package stored in dry medium.

Packaging
> 25 kg. craft sack

Quality Documents
> TS 11140 EN 12004 and DIN EN 12004 certificate C2TE(*) class.
(*) C: Cement based, 2: High Performance, T: Reduced slipping property, E: Extended open time
Ministry of Public Works Item No: 04.013/1-04.013/4